/*++ Copyright (c) 1995-96 Microsoft Corporation Module Name: _mqini.h Abstract: Definitions of parameters that can be read from ini file. Definitions of default values. General definitions shared among setup and QM (YoelA, 10-Feb-97) Author: Doron Juster (DoronJ) 14-May-96 Created --*/ #ifndef __TEMP_MQINI_H #define __TEMP_MQINI_H #define MSMQ_PROGRESS_REPORT_TIME_DEFAULT 900000 #define MSMQ_PROGRESS_REPORT_TIME_REGNAME TEXT("ProgressReportTime") //--------------------------------------------------------- // Definition for client configuration //--------------------------------------------------------- // Registry name for remote QM machine name #define RPC_REMOTE_QM_REGNAME TEXT("RemoteQMMachine") //--------------------------------------------------------- // Definition of RPC end points //--------------------------------------------------------- // // If this registry does not exist (default) or it's 0 then use dynamic // endpoints. Otherwise, use predefined ones, from registry. // This is for MQIS interfaces. // #define RPC_DEFAULT_PREDEFINE_DS_EP 0 #define RPC_PREDEFINE_DS_EP_REGNAME TEXT("UseDSPredefinedEP") // // as above, but for RT-QM and QM-QM interfaces. // #define RPC_DEFAULT_PREDEFINE_QM_EP 0 #define RPC_PREDEFINE_QM_EP_REGNAME TEXT("UseQMPredefinedEP") //Default local RPC End Point between RT and QM #define RPC_LOCAL_EP TEXT("QMsvc") #define RPC_LOCAL_EP_REGNAME TEXT("RpcLocalEp") #define RPC_LOCAL_EP2 TEXT("QMsvc2") #define RPC_LOCAL_EP_REGNAME2 TEXT("RpcLocalEp2") // default for RPC IP port (for QM remote read and dependent clients) #define FALCON_DEFAULT_QM_RPC_IP_PORT TEXT("2799") #define FALCON_QM_RPC_IP_PORT_REGNAME TEXT("MsmqQMRpcIpPort") #define FALCON_DEFAULT_QM_RPC_IP_PORT2 TEXT("2801") #define FALCON_QM_RPC_IP_PORT_REGNAME2 TEXT("MsmqQMRpcIpPort2") // default for IPX port for RPC (for QM remote read) #define FALCON_DEFAULT_QM_RPC_IPX_PORT TEXT("2799") #define FALCON_QM_RPC_IPX_PORT_REGNAME TEXT("MsmqQMRpcIpxPort") #define FALCON_DEFAULT_QM_RPC_IPX_PORT2 TEXT("2801") #define FALCON_QM_RPC_IPX_PORT_REGNAME2 TEXT("MsmqQMRpcIpxPort2") // Default local RPC End Point between RT and MQDSSRV #define DEFAULT_RPC_DS_LOCAL_EP TEXT("DSLocal") #define RPC_DS_LOCAL_EP_REGNAME TEXT("DSRpcLocalEp") // Default local RPC End Point between MQAD and QM #define DEFAULT_NOTIFY_EP TEXT("QMNotify") // default for RPC IP port (for DS) #define FALCON_DEFAULT_DS_RPC_IP_PORT TEXT("2879") #define FALCON_DS_RPC_IP_PORT_REGNAME TEXT("MsmqDSRpcIpPort") // default for IPX port for RPC (for DS) #define FALCON_DEFAULT_DS_RPC_IPX_PORT TEXT("2879") #define FALCON_DS_RPC_IPX_PORT_REGNAME TEXT("MsmqDSRpcIpxPort") //--------------------------------------------------------- // Definition of winsock ports //--------------------------------------------------------- // default IP port for Falcon sessions. #define FALCON_DEFAULT_IP_PORT 1801 #define FALCON_IP_PORT_REGNAME TEXT("MsmqIpPort") // default IP port for ping. #define FALCON_DEFAULT_PING_IP_PORT 3527 #define FALCON_PING_IP_PORT_REGNAME TEXT("MsmqIpPingPort") // Default for ack timeout #define MSMQ_DEFAULT_ACKTIMEOUT 5000 #define MSMQ_ACKTIMEOUT_REGNAME TEXT("AckTimeout") // Default for Storage ack timeout #define MSMQ_DEFAULT_STORE_ACKTIMEOUT 500 #define MSMQ_STORE_ACKTIMEOUT_REGNAME TEXT("StoreAckTimeout") // Default for Idle acknowledge delay (in milisecond) #define MSMQ_DEFAULT_IDLE_ACK_DELAY 500 #define MSMQ_IDLE_ACK_DELAY_REGNAME TEXT("IdleAckDelay") // Default size for remove duplicate tabel #define MSMQ_DEFAULT_REMOVE_DUPLICATE_SIZE 10000 #define MSMQ_REMOVE_DUPLICATE_SIZE_REGNAME TEXT("RemoveDuplicateSize") // Default interval for remove duplicate tabel cleanup #define MSMQ_DEFAULT_REMOVE_DUPLICATE_CLEANUP (30 * 60 * 1000) #define MSMQ_REMOVE_DUPLICATE_CLEANUP_REGNAME TEXT("RemoveDuplicateCleanup") // Default for Max Unacked Packet #ifdef _DEBUG #define MSMQ_DEFAULT_WINDOW_SIZE_PACKET 32 #else #define MSMQ_DEFAULT_WINDOW_SIZE_PACKET 64 #endif #define MSMQ_MAX_WINDOW_SIZE_REGNAME TEXT("MaxUnackedPacket") // Default for Cleanup interval #define MSMQ_DEFAULT_SERVER_CLEANUP 120000 #define MSMQ_DEFAULT_CLIENT_CLEANUP 300000 // QoS session should be cleaned up less frequently than // regular sessions, because it takes more time to // establish a QoS session. // By default, QoS sessions cleanup time is twice as large as // the regular cleanup time #define MSMQ_DEFAULT_QOS_CLEANUP_MULTIPLIER 2 #define MSMQ_CLEANUP_INTERVAL_REGNAME TEXT("CleanupInterval") #define MSMQ_QOS_CLEANUP_INTERVAL_MULTIPLIER_REGNAME TEXT("QosCleanupIntervalMultiplier") #define MSMQ_DEFAULT_MESSAGE_CLEANUP (6 * 60 * 60 * 1000) #define MSMQ_MESSAGE_CLEANUP_INTERVAL_REGNAME TEXT("MessageCleanupInterval") // // Default time interval for refreshing the DS servers list // // Default time interval for refreshing the DS current site servers list and Longlive time (in hours - 7 days) #define MSMQ_DEFAULT_DS_SITE_LIST_REFRESH (7 * 24) #define MSMQ_DS_SITE_LIST_REFRESH_REGNAME TEXT("DSSiteListRefresh") // Default time interval for refreshing the DS enterprise data - sites / servers list // (in hours - 28 days) #define MSMQ_DEFAULT_DS_ENTERPRISE_LIST_REFRESH (28 * 24) #define MSMQ_DS_ENTERPRISE_LIST_REFRESH_REGNAME TEXT("DSEnterpriseListRefresh") // Default time interval for refreshing the DS lists, in case the previous call failed // (in Minutes - 1 hour) #define MSMQ_DEFAULT_DSLIST_REFRESH_ERROR_RETRY_INTERVAL 60 #define MSMQ_DSLIST_REFRESH_ERROR_RETRY_INTERVAL TEXT("DSListRefreshErrorRetryInterval") // // Next Site and enterprise refresh times // This values are quad word and set by the QM (should not be set manually) // However, deleting these values from the registry will cause Site / Enterprise // refresh on the next QM startup (YoelA - 23-Oct-2000) // #define MSMQ_DS_NEXT_SITE_LIST_REFRESH_TIME_REGNAME TEXT("DSNextSiteListRefreshTime") #define MSMQ_DS_NEXT_ENTERPRISE_LIST_REFRESH_TIME_REGNAME TEXT("DSNextEnterpriseListRefreshTime") // Default time interval for updating the DS (5 minutes) #define MSMQ_DEFAULT_DSUPDATE_INTERVAL (5 * 60 * 1000) #define MSMQ_DSUPDATE_INTERVAL_REGNAME TEXT("DSUpdateInterval") // Default time interval for updating the sites information in the DS (12 hours) #define MSMQ_DEFAULT_SITES_UPDATE_INTERVAL (12 * 60 * 60 * 1000) #define MSMQ_SITES_UPDATE_INTERVAL_REGNAME TEXT("SitesUpdateInterval") // Minimum interval between successive ADS searches to find DS servers (in seconds) (30 minutes) #define MSMQ_DEFAULT_DSCLI_ADSSEARCH_INTERVAL (60 * 30) #define MSMQ_DSCLI_ADSSEARCH_INTERVAL_REGNAME TEXT("DSCliSearchAdsForServersIntervalSecs") // Minimum interval between successive ADS searches to refresh IPSITE mapping (in seconds) (60 minutes) #define MSMQ_DEFAULT_IPSITE_ADSSEARCH_INTERVAL (60 * 60) #define MSMQ_IPSITE_ADSSEARCH_INTERVAL_REGNAME TEXT("DSAdsRefreshIPSitesIntervalSecs") // For generating write requests // Minimum interval between successive ADS searches to refresh NT4SITES mapping (in seconds) (6 hours) #define MSMQ_DEFAULT_NT4SITES_ADSSEARCH_INTERVAL (60 * 60 * 6) #define MSMQ_NT4SITES_ADSSEARCH_INTERVAL_REGNAME TEXT("DSAdsRefreshNT4SitesIntervalSecs") // Default driver and service name #define MSMQ_DEFAULT_DRIVER TEXT("MQAC") #define MSMQ_DRIVER_REGNAME TEXT("DriverName") #define QM_DEFAULT_SERVICE_NAME TEXT("MSMQ") // Name of storage folders #define MSMQ_STORE_RELIABLE_PATH_REGNAME TEXT("StoreReliablePath") #define MSMQ_STORE_PERSISTENT_PATH_REGNAME TEXT("StorePersistentPath") #define MSMQ_STORE_JOURNAL_PATH_REGNAME TEXT("StoreJournalPath") #define MSMQ_STORE_LOG_PATH_REGNAME TEXT("StoreLogPath") //name of the queue mapping folder #define MSMQ_MAPPING_PATH_REGNAME TEXT("QueuesAliasPath") // Deafult size of memory mapped file #define MSMQ_MESSAGE_SIZE_LIMIT_REGNAME TEXT("MaxMessageSize") #define MSMQ_DEFAULT_MESSAGE_SIZE_LIMIT (4 * 1024 * 1024) // Next message ID to be used (low order 32 bit) #define MSMQ_MESSAGE_ID_LOW_32_REGNAME TEXT("MessageID") // Next message ID to be used (high order 32 bit) #define MSMQ_MESSAGE_ID_HIGH_32_REGNAME TEXT("MessageIdHigh32") // Current SeqID value at the last restore time #define MSMQ_LAST_SEQID_REGNAME TEXT("SeqIDAtLastRestore") // Next SeqID to be used #define MSMQ_SEQ_ID_REGNAME TEXT("SeqID") // // Name of DS servers. // // MQISServer is the list of MQIS servers in present site. This list is not // present when machine is in workgroup mode. // CurrentMQISServer is an online MQIS server found by the msmq service. // // LkgMQISServer is the LastKnownGood list. this is used to fix 4723. // #define MSMQ_DEFAULT_DS_SERVER TEXT("\\\\") #define MSMQ_DS_SERVER_REGVALUE TEXT("MQISServer") #define MSMQ_DS_SERVER_REGNAME TEXT("MachineCache\\MQISServer") #define MSMQ_DS_CURRENT_SERVER_REGNAME \ TEXT("MachineCache\\CurrentMQISServer") #define MAX_REG_DSSERVER_LEN 1500 #define DS_SERVER_SEPERATOR_SIGN ',' // Static DS server option #define MSMQ_STATIC_DS_SERVER_REGNAME TEXT("MachineCache\\StaticMQISServer") // // When automatic search for msmq server on domain controller fail, or return // no result, then this registry entry is read. If available, then this is // the result of the "automatic" search. See ds\getmqds\getmqds.cpp. // #define MSMQ_FORCED_DS_SERVER_REGNAME TEXT("MachineCache\\ForcedDSServer") // DS server per thread #define MSMQ_THREAD_DS_SERVER_REGNAME TEXT("MachineCache\\PerThreadDSServer") #define MSMQ_DEFAULT_THREAD_DS_SERVER 0 // Name of MQ service #define MSMQ_MQS_REGNAME TEXT("MachineCache\\MQS") #define MSMQ_MQS_ROUTING_REGNAME TEXT("MachineCache\\MQS_Routing") #define MSMQ_MQS_DSSERVER_REGNAME TEXT("MachineCache\\MQS_DsServer") #define MSMQ_MQS_DEPCLINTS_REGNAME TEXT("MachineCache\\MQS_DepClients") // Name of MQIS write message timeout #define MSMQ_MQIS_WRITETIMEOUT_REGNAME TEXT("WriteMsgTimeout") // Name of QM id #define MSMQ_QMID_REGVALUE TEXT("QMId") #define MSMQ_QMID_REGNAME TEXT("MachineCache\\QMId") // Dependent client Supporting Server QM id #define MSMQ_SUPPORT_SERVER_QMID_REGVALUE TEXT("ServerQMId") #define MSMQ_SUPPORT_SERVER_QMID_REGNAME TEXT("MachineCache\\ServerQMId") // Name of DS Security Cache #define MSMQ_DS_SECURITY_CACHE_REGNAME TEXT("DsSecurityCache") // Name of site id #define MSMQ_SITEID_REGNAME TEXT("MachineCache\\SiteId") #define MSMQ_SITENAME_REGNAME TEXT("MachineCache\\SiteName") // Name of enterprise id #define MSMQ_ENTERPRISEID_REGNAME TEXT("MachineCache\\EnterpriseId") // Name of MQIS master id #define MSMQ_MQIS_MASTERID_REGNAME TEXT("MachineCache\\MasterId") // Name of key for servers cache. #define MSMQ_SERVERS_CACHE_REGNAME TEXT("ServersCache") // machine quota #define MSMQ_MACHINE_QUOTA_REGNAME TEXT("MachineCache\\MachineQuota") // Machine journal quota #define MSMQ_MACHINE_JOURNAL_QUOTA_REGNAME TEXT("MachineCache\\MachineJournalQuota") // Default for transaction crash point #define FALCON_DEFAULT_CRASH_POINT 0 #define FALCON_CRASH_POINT_REGNAME TEXT("XactCrashPoint") // Default for transaction crash latency #define FALCON_DEFAULT_CRASH_LATENCY 0 #define FALCON_CRASH_LATENCY_REGNAME TEXT("XactCrashLatency") // Name & Default for transaction Commit/Abort internal retry #define FALCON_DEFAULT_XACT_RETRY_INTERVAL 300 #define FALCON_XACT_RETRY_REGNAME TEXT("XactAbortCommitRetryInterval") // Name & Default for transaction v1 Compatibility Mode #define FALCON_DEFAULT_XACT_V1_COMPATIBLE 0 #define FALCON_XACT_V1_COMPATIBLE_REGNAME TEXT("XactDeadLetterAlways") // Name for the delay of local receive expiration for transacted messages #define FALCON_XACT_DELAY_LOCAL_EXPIRE_REGNAME TEXT("XactDelayReceiveNack") // Default for sequential acks resend time #define FALCON_DEFAULT_SEQ_ACK_RESEND_TIME 60 #define FALCON_SEQ_ACK_RESEND_REGNAME TEXT("SeqAckResendTime") // Default for ordered resend times: 1-3, 4-6, 7-9, all further #define FALCON_DEFAULT_ORDERED_RESEND13_TIME 30 #define FALCON_ORDERED_RESEND13_REGNAME TEXT("SeqResend13Time") #define FALCON_DEFAULT_ORDERED_RESEND46_TIME (5 * 60) #define FALCON_ORDERED_RESEND46_REGNAME TEXT("SeqResend46Time") #define FALCON_DEFAULT_ORDERED_RESEND79_TIME (30 * 60) #define FALCON_ORDERED_RESEND79_REGNAME TEXT("SeqResend79Time") #define FALCON_DEFAULT_ORDERED_RESEND10_TIME (6 * 60 * 60) #define FALCON_ORDERED_RESEND10_REGNAME TEXT("SeqResend10Time") // Debugging lever: all resend times the same #define FALCON_DBG_RESEND_REGNAME TEXT("XactResendTime") // Max delay for sending ordering ack #define FALCON_MAX_SEQ_ACK_DELAY 10 #define FALCON_MAX_SEQ_ACK_DELAY_REGNAME TEXT("SeqMaxAckDelay") // Interval(minutes) for QM to check for inactive sequences and delete them #define FALCON_DEFAULT_INSEQS_CHECK_INTERVAL 60 * 24 #define FALCON_INSEQS_CHECK_REGNAME TEXT("InSeqCheckInterval") // Interval(days) for QM to clean away inactive sequences #define FALCON_DEFAULT_INSEQS_CLEANUP_INTERVAL 90 #define FALCON_INSEQS_CLEANUP_REGNAME TEXT("InSeqCleanupInterval") // Interval(msec) for log manager to check if the flush/chkpoint is needed #define FALCON_DEFAULT_LOGMGR_TIMERINTERVAL 10 #define FALCON_LOGMGR_TIMERINTERVAL_REGNAME TEXT("LogMgrTimerInterval") // Max interval (msec) for log manager flushes (if there was no other reason to do it before) #define FALCON_DEFAULT_LOGMGR_FLUSHINTERVAL 50 #define FALCON_LOGMGR_FLUSHINTERVAL_REGNAME TEXT("LogMgrFlushInterval") // Max interval (msec) for log manager internal checkpoints (if there was no other reason to do it before) #define FALCON_DEFAULT_LOGMGR_CHKPTINTERVAL 10000 #define FALCON_LOGMGR_CHKPTINTERVAL_REGNAME TEXT("LogMgrChkptInterval") // Log manager buffers number #define FALCON_DEFAULT_LOGMGR_BUFFERS 400 #define FALCON_LOGMGR_BUFFERS_REGNAME TEXT("LogMgrBuffers") // Log manager file size #define FALCON_DEFAULT_LOGMGR_SIZE 0x600000 #define FALCON_LOGMGR_SIZE_REGNAME TEXT("LogMgrFileSize") // Log manager sleep time if not enough append asynch threads #define FALCON_DEFAULT_LOGMGR_SLEEP_ASYNCH 500 #define FALCON_LOGMGR_SLEEP_ASYNCH_REGNAME TEXT("LogMgrSleepAsynch") // Log manager append asynch repeat limit #define FALCON_DEFAULT_LOGMGR_REPEAT_ASYNCH 100 #define FALCON_LOGMGR_REPEAT_ASYNCH_REGNAME TEXT("LogMgrRepeatAsynchLimit") // Falcon interval (msec) for probing log manager flush #define FALCON_DEFAULT_LOGMGR_PROBE_INTERVAL 100 #define FALCON_LOGMGR_PROBE_INTERVAL_REGNAME TEXT("LogMgrProbeInterval") // Resource manager checkpoints period (msec) #define FALCON_DEFAULT_RM_FLUSH_INTERVAL 1800000 #define FALCON_RM_FLUSH_INTERVAL_REGNAME TEXT("RMFlushInterval") // Resource manager client name #define FALCON_DEFAULT_RM_CLIENT_NAME TEXT("Falcon") #define FALCON_RM_CLIENT_NAME_REGNAME TEXT("RMClientName") // RT stub RM name #define FALCON_DEFAULT_STUB_RM_NAME TEXT("StubRM") #define FALCON_RM_STUB_NAME_REGNAME TEXT("RMStubName") // Transactions persistant file location #define FALCON_DEFAULT_XACTFILE_PATH TEXT("MQTrans") #define FALCON_XACTFILE_PATH_REGNAME TEXT("StoreXactLogPath") #define FALCON_XACTFILE_REFER_NAME TEXT("Transactions") // Incoming sequences persistant file location #define FALCON_DEFAULT_INSEQFILE_PATH TEXT("MQInSeqs") #define FALCON_INSEQFILE_PATH_REGNAME TEXT("StoreInSeqLogPath") #define FALCON_INSEQFILE_REFER_NAME TEXT("Incoming Sequences") // Outgoming sequences persistant file location #define FALCON_DEFAULT_OUTSEQFILE_PATH TEXT("MQOutSeqs") #define FALCON_OUTSEQFILE_PATH_REGNAME TEXT("StoreOutSeqLogPath") #define FALCON_OUTSEQFILE_REFER_NAME TEXT("Outgoing Sequences") // Logger file #define FALCON_DEFAULT_LOGMGR_PATH TEXT("QMLog") #define FALCON_LOGMGR_PATH_REGNAME TEXT("StoreMqLogPath") // Logger data are created #define FALCON_LOGDATA_CREATED_REGNAME TEXT("LogDataCreated") // Default for TIME_TO_REACH_QUEUE (90 days, in seconds). #define MSMQ_LONG_LIVE_REGNAME TEXT("MachineCache\\LongLiveTime") #define MSMQ_DEFAULT_LONG_LIVE (90 * 24 * 60 * 60) // Expiration time of entries in the base crypto key cache. #define CRYPT_KEY_CACHE_DEFAULT_EXPIRATION_TIME (60000 * 10) // 10 minutes. #define CRYPT_KEY_CACHE_EXPIRATION_TIME_REG_NAME TEXT("CryptKeyExpirationTime") // Expiration time of entries in the enhanced crypto key cache. #define CRYPT_KEY_ENH_CACHE_DEFAULT_EXPIRATION_TIME (60000 * 60 * 12) // 12 hours. #define CRYPT_KEY_ENH_CACHE_EXPIRATION_TIME_REG_NAME TEXT("CryptKeyEnhExpirationTime") // Cache size for send crypto keys. #define CRYPT_SEND_KEY_CACHE_DEFAULT_SIZE 53 #define CRYPT_SEND_KEY_CACHE_REG_NAME TEXT("CryptSendKeyCacheSize") // Cache size for receive crypto keys. #define CRYPT_RECEIVE_KEY_CACHE_DEFAULT_SIZE 127 #define CRYPT_RECEIVE_KEY_CACHE_REG_NAME TEXT("CryptReceiveKeyCacheSize") // Certificate info cache. #define CERT_INFO_CACHE_DEFAULT_EXPIRATION_TIME (60000 * 20) // 20 minutes. #define CERT_INFO_CACHE_EXPIRATION_TIME_REG_NAME TEXT("CertInfoCacheExpirationTime") #define CERT_INFO_CACHE_DEFAULT_SIZE 53 #define CERT_INFO_CACHE_SIZE_REG_NAME TEXT("CertInfoCacheSize") // QM public key cache. #define QM_PB_KEY_CACHE_DEFAULT_EXPIRATION_TIME (60000 * 45) // 45 minutes. #define QM_PB_KEY_CACHE_EXPIRATION_TIME_REG_NAME TEXT("QmPbKeyCacheExpirationTime") #define QM_PB_KEY_CACHE_DEFAULT_SIZE 53 #define QM_PB_KEY_CACHE_SIZE_REG_NAME TEXT("QmPbKeyCacheSize") // User authz context info cache. #define USER_CACHE_DEFAULT_EXPIRATION_TIME (60000 * 30) // 30 minutes. #define USER_CACHE_EXPIRATION_TIME_REG_NAME TEXT("UserCacheExpirationTime") #define USER_CACHE_SIZE_DEFAULT_SIZE 253 #define USER_CACHE_SIZE_REG_NAME TEXT("UserCacheSize") //--------------------------------------------------------- // Definition for private system queues //--------------------------------------------------------- #define MSMQ_MAX_PRIV_SYSQUEUE_REGNAME TEXT("MaxSysQueue") #define MSMQ_PRIV_SYSQUEUE_PRIO_REGNAME TEXT("SysQueuePriority") // // the default for private system queue priority is defined in // mqprops.h: // #define DEFAULT_SYS_Q_BASEPRIORITY 0x7fff // //--------------------------------------------------------- // Wolfpack support //--------------------------------------------------------- // cluster name #define FALCON_CLUSTER_NAME_REGNAME TEXT("ClusterName") // // see session.cpp for code and usage // This registry is to revert the session behavior for // the cluster node to not binding specifically to an IP for // outgoing connection // #define MSMQ_DEFAULT_CLUSTER_NOT_BIND_ALL_IP 0 #define MSMQ_CLUSTER_BIND_ALL_IP TEXT("ClusterBindAllIP") //--------------------------------------------------------- // Definition for threads pool used in remote read. //--------------------------------------------------------- // Maximum number of threads. #define FALCON_DEFUALT_MAX_RRTHREADS_WKS 24 #define FALCON_DEFUALT_MAX_RRTHREADS_SRV 96 #define FALCON_MAX_RRTHREADS_REGNAME TEXT("MaxRRThreads") // Minimum number of threads to be kept alive, even if idle. #define FALCON_DEFUALT_MIN_RRTHREADS_WKS 4 #define FALCON_DEFUALT_MIN_RRTHREADS_SRV 16 #define FALCON_MIN_RRTHREADS_REGNAME TEXT("MinRRThreads") // time to live while idel. in milliseconds. #define FALCON_DEFAULT_RRTHREAD_TTL_WKS (2 * 60 * 1000) #define FALCON_DEFAULT_RRTHREAD_TTL_SRV (5 * 60 * 1000) #define FALCON_RRTHREAD_TTL_REGNAME TEXT("RRThreadIdleTTL") //--------------------------------------------------------- // Definition for licensing //--------------------------------------------------------- // maximum number of connections per server (limitted server on NTS). #define DEFAULT_FALCON_SERVER_MAX_CLIENTS 25 // number of allowed sessions for clients. #define DEFAULT_FALCON_MAX_SESSIONS_WKS 10 //---------------------------------------------------------- // Definition for RPC cancel //---------------------------------------------------------- #define FALCON_DEFAULT_RPC_CANCEL_TIMEOUT ( 5 ) // 5 minutes #define FALCON_RPC_CANCEL_TIMEOUT_REGNAME TEXT("RpcCancelTimeout") //---------------------------------------------------------- // General definitions shared among setup and QM //---------------------------------------------------------- // Registry name for MSMQ root folder #define MSMQ_ROOT_PATH TEXT("MsmqRootPath") #define MQ_SETUP_CN GUID_NULL // Registry name for sysprep environment (NT disk image duplication) #define MSMQ_SYSPREP_REGNAME TEXT("Sysprep") // Registry name for workgroup environment #define MSMQ_WORKGROUP_REGNAME TEXT("Workgroup") // Registry name for allowing NT4 users to connect to DC #define MSMQ_ALLOW_NT4_USERS_REGNAME TEXT("AllowNt4Users") // Registry name for disabling weaken security #define MSMQ_DISABLE_WEAKEN_SECURITY_REGNAME TEXT("DisableWeakenSecurity") // Registry for converting packet sequential id to msmq 3.0 (whistler) format #define MSMQ_SEQUENTIAL_ID_MSMQ3_FORMAT_REGNAME TEXT("PacketSequentialIdMsmq3Format") // Registry for installation status #define MSMQ_SETUP_STATUS_REGNAME TEXT("SetupStatus") #define MSMQ_SETUP_DONE 0 #define MSMQ_SETUP_FRESH_INSTALL 1 #define MSMQ_SETUP_UPGRADE_FROM_NT 2 #define MSMQ_SETUP_UPGRADE_FROM_WIN9X 3 #define MSMQ_CURRENT_BUILD_REGNAME TEXT("CurrentBuild") #define MSMQ_PREVIOUS_BUILD_REGNAME TEXT("PreviousBuild") // // The following registry values are used by setup to cache values that // are later used by the msmq service when it create the msmqConfiguration // object. // // Registry name for creating msmqConfiguration object #define MSMQ_CREATE_CONFIG_OBJ_REGNAME TEXT("setup\\CreateMsmqObj") // Registry name for OS type. #define MSMQ_OS_TYPE_REGNAME TEXT("setup\\OSType") // Registry name for SID of user that run setup #define MSMQ_SETUP_USER_SID_REGNAME TEXT("setup\\UserSid") // // if setup from local user, then following REG_DWORD registry // has the value 1. // #define MSMQ_SETUP_USER_LOCAL_REGNAME TEXT("setup\\LocalUser") // // This dword indicate whether or not upgrade of BSC was complete. This // upgrade is done by the msmq service. When starting, this dword is set // to 1. When completing, it's set to 0. So if machine crash in middle of // upgrade, we can resume after boot. // #define MSMQ_BSC_NOT_YET_UPGRADED_REGNAME TEXT("setup\\BscNotYetUpgraded") #define MSMQ_SETUP_BSC_ALREADY_UPGRADED 0 #define MSMQ_SETUP_BSC_NOT_YET_UPGRADED 1 // // Hresult of creating the msmq configuration object. // This key should contain only one value, because the setup UI wait until // this value is modified. // #define MSMQ_CONFIG_OBJ_RESULT_KEYNAME TEXT("setupResult") #define MSMQ_CONFIG_OBJ_RESULT_REGNAME TEXT("setupResult\\MsmqObjResult") //---------------------------------------------------------- // General directory definitions shared among setup and QM //---------------------------------------------------------- #define DIR_MSMQ TEXT("\\msmq") // Root dir for MSMQ #define DIR_MSMQ_STORAGE TEXT("\\storage") // Under MSMQ root #define DIR_MSMQ_LQS TEXT("\\storage\\lqs") // Under MSMQ root #define DIR_MSMQ_MAPPING TEXT("\\mapping") // Under MSMQ root #define DIR_MSMQ_WEB TEXT("\\web") //---------------------------------------------------- // Registry values used for join/leave domain //---------------------------------------------------- // Registry name for machine's domain. Used for join/leave domain. #define MSMQ_MACHINE_DOMAIN_REGNAME TEXT("setup\\MachineDomain") // Registry name for machine's distinguished name (in active directory). // Used for join/leave domain. #define MSMQ_MACHINE_DN_REGNAME TEXT("setup\\MachineDN") // Registry name for always remaining in workgroup. #define MSMQ_SETUP_KEY TEXT("setup\\") #define ALWAYS_WITHOUT_DS_NAME TEXT("AlwaysWithoutDS") #define MSMQ_ALWAYS_WORKGROUP_REGNAME \ (MSMQ_SETUP_KEY ALWAYS_WITHOUT_DS_NAME) #define DEFAULT_MSMQ_ALWAYS_WORKGROUP 0 // Registry name for join status. This is used to implement "transaction" // semantic in the code that automatically join msmq to a domain. #define MSMQ_JOIN_STATUS_REGNAME TEXT("setup\\JoinStatus") #define MSMQ_JOIN_STATUS_START_JOINING 1 #define MSMQ_JOIN_STATUS_JOINED_SUCCESSFULLY 2 #define MSMQ_JOIN_STATUS_FAIL_TO_JOIN 3 #define MSMQ_JOIN_STATUS_UNKNOWN 4 //------------------------------------------------------------------ // Registry name for Ds Environment //------------------------------------------------------------------ #define MSMQ_DS_ENVIRONMENT_REGNAME TEXT("DsEnvironment") #define MSMQ_DS_ENVIRONMENT_UNKNOWN 0 #define MSMQ_DS_ENVIRONMENT_MQIS 1 #define MSMQ_DS_ENVIRONMENT_PURE_AD 2 //------------------------------------------------------------------ // Registry name for enabling local user (force the use of dscli) //------------------------------------------------------------------ #define MSMQ_ENABLE_LOCAL_USER_REGNAME TEXT("EnableLocalUser") //------------------------------------------------------------------ // Registry name for disabling downlevel notification support //------------------------------------------------------------------ #define MSMQ_DOWNLEVEL_REGNAME TEXT("DisableDownlevelNotifications") #define DEFAULT_DOWNLEVEL 0 //--------------------------------------------------------- // General definition for controling QM operation //--------------------------------------------------------- #define FALCON_WAIT_TIMEOUT_REGNAME TEXT("WaitTime") #define FALCON_USING_PING_REGNAME TEXT("UsePing") #define FALCON_QM_THREAD_NO_REGNAME TEXT("QMThreadNo") #define FALCON_CONNECTED_NETWORK TEXT("Connection State") #define MSMQ_DEFERRED_INIT_REGNAME TEXT("DeferredInit") #define MSMQ_TCP_NODELAY_REGNAME TEXT("TCPNoDelay") #define MSMQ_DELIVERY_RETRY_TIMEOUT_SCALE_REGNAME TEXT("DeliveryRetryTimeOutScale") #define DEFAULT_MSMQ_DELIVERY_RETRY_TIMEOUT_SCALE 1 //--------------------------------------------------------- // Registry used for QoS //--------------------------------------------------------- #define MSMQ_USING_QOS_REGNAME TEXT("UseQoS") #define DEFAULT_MSMQ_QOS_SESSION_APP_NAME "Microsoft Message Queuing" #define MSMQ_QOS_SESSIONAPP_REGNAME TEXT("QosSessAppName") #define DEFAULT_MSMQ_QOS_POLICY_LOCATOR "GUID=http://www.microsoft.com/App=MSMQ/VER=2.000/SAPP=Express" #define MSMQ_QOS_POLICYLOCATOR_REGNAME TEXT("QosSessPolicyLoc") // // QFE for Ford. // Allocate more bytes when creating packet in driver, so packet is same // when copied to connector. see session.cpp. Default- 0. // #define MSMQ_ALLOCATE_MORE_REGNAME TEXT("AllocateMore") //--------------------------------------------------------- // Registry used for transaciton mode (default commit, default abort) //--------------------------------------------------------- #define MSMQ_TRANSACTION_MODE_REGNAME TEXT("TransactionMode") #define MSMQ_FORCE_NOT_TRANSACTION_MODE_SWITCH_REGNAME TEXT("ForceNoTransactionModeSwitch") #define MSMQ_ACTIVE_NODE_ID_REGNAME TEXT("ActiveNodeId") //--------------------------------------------------------- // // Registry used for server authentication. // //--------------------------------------------------------- // Use server authentication when communicating via RPC // with the parent server (BSC->PSC, PSC->PEC) #define DEFAULT_SRVAUTH_WITH_PARENT 1 #define SRVAUTH_WITH_PARENT_REG_NAME TEXT("UseServerAuthWithParentDs") // // Crypto Store where server certificate is placed. // #define SRVAUTHN_STORE_NAME_REGNAME TEXT("security\\ServerCertStore") // // Digest (16 bytes) of server certificate. // #define SRVAUTHN_CERT_DIGEST_REGNAME TEXT("security\\ServerCertDigest") // // This bit is set by setup, if user select the "secure comm" check box, // meaning that he always, and unconditionally, want to have server // authentication. // #define MSMQ_SECURE_DS_COMMUNICATION_REGNAME \ TEXT("Security\\SecureDSCommunication") #define MSMQ_DEFAULT_SECURE_DS_COMMUNICATION 0 //--------------------------------------------------------- // // Registry used for message authentication. // //--------------------------------------------------------- // // DWORD. // When 1, only messages with enhanced authentication are accepted. // Messages with only msmq1.0 signature are rejected. // #define DEFAULT_USE_ONLY_ENH_MSG_AUTHN 0 #define USE_ONLY_ENH_MSG_AUTHN_REGNAME TEXT("security\\RcvOnlyEnhMsgAuthn") // // DWORD. // When 2, MQSend compute only the msmq1.0 signature, unless MSMQ20 was // specified by caller. // When 4, MQSend compute only the win2k signature, unless MSMQ10 was // specified by caller. // when 1, compute both signatures, unless caller specify what he wants. // These values match those for PROPID_M_AUTH_LEVEL in mqprops.h // #define DEFAULT_SEND_MSG_AUTHN 2 #define SEND_MSG_AUTHN_REGNAME TEXT("security\\SendMsgAuthn") //--------------------------------------------------------- // // Registry used for client certificates. // //--------------------------------------------------------- // // Enable (or disable) auto registration of internal certificate. // Enabled by default. // #define AUTO_REGISTER_INTCERT_REGNAME TEXT("security\\AutoRegisterIntCert") #define DEFAULT_AUTO_REGISTER_INTCERT 1 // // used for mqrt to tell what error was encountered while trying to // register a certificate at logon. // #define AUTO_REGISTER_ERROR_REGNAME TEXT("AutoRegisterError") // // Time to wait until domain controller MSMQ server is up and running. // this value is number of 15 seconds internal. // default 40 mean 10 minutes (40 * 15 seconds). // #define AUTO_REGISTER_WAIT_DC_REGNAME \ TEXT("security\\AutoIntCertWaitIntervals") #define DEFAULT_AUTO_REGISTER_WAIT_DC 40 // // Value under HKCU that is set to 1 after auto registration succeed. // #define CERTIFICATE_REGISTERD_REGNAME TEXT("CertificateRegistered") // // Value under HKCU that is set to 1 when the certificate exist on the local store // but not registered in the DS // #define CERTIFICATE_SHOULD_REGISTERD_IN_DS_REGNAME TEXT("ShouldRegisterCertInDs") // // Name and value of registry under the "Run" key // #define RUN_INT_CERT_REGNAME TEXT("MsmqIntCert") #define DEFAULT_RUN_INT_CERT TEXT("regsvr32 /s mqrt.dll") //+-------------------------------------------- // // Registry used for caching machine account // //+-------------------------------------------- // // sid of machine account. // #define MACHINE_ACCOUNT_REGNAME TEXT("security\\MachineAccount") //+-------------------------------------------- // // Registry used for authz flags // //+-------------------------------------------- // // authz flags. // #define MSMQ_AUTHZ_FLAGS_REGNAME TEXT("security\\AuthzFlags") #define MSMQ_AUTHZ_FLAGS_REGKEY TEXT("security") #define MSMQ_AUTHZ_FLAGS_REGVALUE TEXT("AuthzFlags") //+----------------------------------------------------------------------- // // Registry used for marking lqs files Security descriptor was updated // //+----------------------------------------------------------------------- #define MSMQ_LQS_UPDATED_SD_REGNAME TEXT("security\\LqsUpdatedSD") //+-------------------------------------------- // // Registry used for encryption // //+-------------------------------------------- // // Regname for name of Crypto container. // #define MSMQ_CRYPTO40_DEFAULT_CONTAINER TEXT("MSMQ") #define MSMQ_CRYPTO40_CONTAINER_REG_NAME \ TEXT("security\\Crypto40Container") #define MSMQ_CRYPTO128_DEFAULT_CONTAINER TEXT("MSMQ_128") #define MSMQ_CRYPTO128_CONTAINER_REG_NAME \ TEXT("security\\Crypto128Container") // // Because of a bug in beta3 and rc1 crypto api, control panel can not // renew crypto key. To workaround, on first boot, first time the service // acquire the crypto provider, it sets again the container security. // #define MSMQ_ENH_CONTAINER_FIX_REGNAME TEXT("security\\EnhContainerFixed") #define MSMQ_BASE_CONTAINER_FIX_REGNAME TEXT("security\\BaseContainerFixed") // // Regname for name of Crypto container, to be used by the mqforgn tool. // #define MSMQ_FORGN_BASE_DEFAULT_CONTAINER TEXT("MSMQ_FOREIGN_BASE") #define MSMQ_FORGN_BASE_KEY_REGNAME TEXT("security\\") #define MSMQ_FORGN_BASE_VALUE_REGNAME TEXT("ForeignBaseContainer") #define MSMQ_FORGN_BASE_CONTAINER_REGNAME \ (MSMQ_FORGN_BASE_KEY_REGNAME MSMQ_FORGN_BASE_VALUE_REGNAME) #define MSMQ_FORGN_ENH_DEFAULT_CONTAINER TEXT("MSMQ_FOREIGN_ENH") #define MSMQ_FORGN_ENH_KEY_REGNAME TEXT("security\\") #define MSMQ_FORGN_ENH_VALUE_REGNAME TEXT("ForeignEnhContainer") #define MSMQ_FORGN_ENH_CONTAINER_REGNAME \ (MSMQ_FORGN_ENH_KEY_REGNAME MSMQ_FORGN_ENH_VALUE_REGNAME) // // Windows bug 633909. // RC2 effective enhanced key len changed from 40 bits to 128 bits. // // The following registry let user revert to 40 bits key, to enable backward // compatibility. default- 0. non-zero value force using 40 bits keys. // #define MSMQ_RC2_SNDEFFECTIVE_40_REGNAME TEXT("security\\SendEnhRC2With40") // // The following registry force rejection of messages encrypted with RC2 // if enhanced provider is used but effective length is 40. // By default (value 0), all RC2 encryption are accepted. To enforce strong // security, set this one to 1. Then messages from win2k or xp that use // effective length of 40 will be rejected. // #define MSMQ_REJECT_RC2_IFENHLEN_40_REGNAME \ TEXT("security\\RejectEnhRC2IfLen40") //--------------------------------------------------------- // // Registry used by the NT5 replication service. // //--------------------------------------------------------- // Interval to next replication cycle, if present one failed. in Seconds. #define RP_DEFAULT_FAIL_REPL_INTERVAL (120) #define RP_FAIL_REPL_INTERVAL_REGNAME TEXT("Migration\\FailReplInterval") // Interval to next hello, in seconds #define RP_DEFAULT_HELLO_INTERVAL (20 * 60) #define RP_HELLO_INTERVAL_REGNAME TEXT("Migration\\HelloInterval") #define RP_DEFAULT_TIMES_HELLO (1) #define RP_TIMES_HELLO_FOR_REPLICATION_INTERVAL_REGNAME \ TEXT("Migration\\TimesHelloForReplicationInterval") // Buffer between current and allowed purge SN #define RP_DEFAULT_PURGE_BUFFER (PURGE_BUFFER_SN) #define RP_PURGE_BUFFER_REGNAME TEXT("Migration\\PurgeBuffer") // Frequency to send PSC Ack #define RP_DEFAULT_PSC_ACK_FREQUENCY (PSC_ACK_FREQUENCY_SN) #define RP_PSC_ACK_FREQUENCY_REGNAME TEXT("Migration\\PSCAckFrequencySN") // Timeout of replication messages. in second. #define RP_DEFAULT_REPL_MSG_TIMEOUT (20 * 60) #define RP_REPL_MSG_TIMEOUT_REGNAME TEXT("Migration\\ReplMsgTimeout") // My site id in NT4. #define MSMQ_NT4_MASTERID_REGNAME TEXT("Migration\\MasterIdOnNt4") // Number of threads for answering replication/sync messages from NT4 servers. #define RP_DEFAULT_REPL_NUM_THREADS 8 #define RP_REPL_NUM_THREADS_REGNAME TEXT("Migration\\ReplThreads") // DS query: Number of returned objects per ldap page #define RP_DEFAULT_OBJECT_PER_LDAPPAGE 1000 #define RP_OBJECT_PER_LDAPPAGE_REGNAME TEXT("Migration\\ObjectPerLdapPage") // If "ON_DEMAND" is 1, then replication is done on demand when // "REPLICATE_NOW" is 1. The service read the "_NOW" flag each second. #define RP_REPL_ON_DEMAND_REGNAME TEXT("Migration\\ReplOnDemand") #define RP_REPLICATE_NOW_REGNAME TEXT("Migration\\ReplicateNow") // // Value of MQS before upgrade. Relevant only on ex-PEC // #define MSMQ_PREMIG_MQS_REGNAME TEXT("PreMigMQS") //+---------------------------------------- // // Registry key for debugging. // //+---------------------------------------- // // DWORD. If set to 1, then Rt will mark the provider used for authentication // as non default and will send the provider name. // #define USE_NON_DEFAULT_AUTHN_PROV_REGNAME TEXT("debug\\UseNonDefAuthnProv") // // DWORD. Number of security subsections to insert before the real one. // #define PREFIX_SUB_SECTIONS_REGNAME TEXT("debug\\PrefixSubSections") // // DWORD. Number of security subsections to insert after the real one. // #define POSTFIX_SUB_SECTIONS_REGNAME TEXT("debug\\PostfixSubSections") //+---------------------------------------- // // Registry value for local admin api // //+---------------------------------------- // // If this reg value is 1, then query operations of local admin api // are restricted to administrators only. Bug 7520. // Defualt is unrestricted, for backward compatibility. // #define MSMQ_DEFAULT_RESTRICT_ADMIN_API 0 #define MSMQ_RESTRICT_ADMIN_API_TO_LA 1 #define MSMQ_RESTRICT_ADMIN_API_REGNAME TEXT("RestrictAdminApi") #endif // __TEMP_MQINI_H