/*++ Copyright (c) Microsoft Corporation. All rights reserved. Module Name: atm.h Abstract: This module defines the structures, macros, and manifests available to ATM aware components. Author: NDIS/ATM Development Team Revision History: Initial Version - March 1996 --*/ #ifndef _ATM_H_ #define _ATM_H_ // // Address type // typedef ULONG ATM_ADDRESSTYPE; #define ATM_NSAP 0 #define ATM_E164 1 // // ATM Address // #define ATM_MAC_ADDRESS_LENGTH 6 // Same as 802.x #define ATM_ADDRESS_LENGTH 20 // // Special characters in ATM address string used in textual representations // #define ATM_ADDR_BLANK_CHAR L' ' #define ATM_ADDR_PUNCTUATION_CHAR L'.' #define ATM_ADDR_E164_START_CHAR L'+' typedef struct _ATM_ADDRESS { ATM_ADDRESSTYPE AddressType; ULONG NumberOfDigits; UCHAR Address[ATM_ADDRESS_LENGTH]; } ATM_ADDRESS, *PATM_ADDRESS; // // AAL types that the miniport supports // #define AAL_TYPE_AAL0 1 #define AAL_TYPE_AAL1 2 #define AAL_TYPE_AAL34 4 #define AAL_TYPE_AAL5 8 typedef ULONG ATM_AAL_TYPE, *PATM_AAL_TYPE; // // Types of Information Elements // typedef enum { IE_AALParameters, IE_TrafficDescriptor, IE_BroadbandBearerCapability, IE_BHLI, IE_BLLI, IE_CalledPartyNumber, IE_CalledPartySubaddress, IE_CallingPartyNumber, IE_CallingPartySubaddress, IE_Cause, IE_QOSClass, IE_TransitNetworkSelection, IE_BroadbandSendingComplete, IE_LIJCallId, IE_Raw } Q2931_IE_TYPE; // // Common header for each Information Element // typedef struct _Q2931_IE { Q2931_IE_TYPE IEType; ULONG IELength; // Bytes, including IEType and IELength fields UCHAR IE[1]; } Q2931_IE, *PQ2931_IE; // // Definitions for SapType in CO_SAP // #define SAP_TYPE_NSAP 0x00000001 #define SAP_TYPE_E164 0x00000002 // // Values used for the Mode field in AAL5_PARAMETERS // #define AAL5_MODE_MESSAGE 0x01 #define AAL5_MODE_STREAMING 0x02 // // Values used for the SSCSType field in AAL5_PARAMETERS // #define AAL5_SSCS_NULL 0x00 #define AAL5_SSCS_SSCOP_ASSURED 0x01 #define AAL5_SSCS_SSCOP_NON_ASSURED 0x02 #define AAL5_SSCS_FRAME_RELAY 0x04 // // AAL Parameters // typedef struct _AAL1_PARAMETERS { UCHAR Subtype; UCHAR CBRRate; USHORT Multiplier; UCHAR SourceClockRecoveryMethod; UCHAR ErrorCorrectionMethod; USHORT StructuredDataTransferBlocksize; UCHAR PartiallyFilledCellsMethod; } AAL1_PARAMETERS, *PAAL1_PARAMETERS; typedef struct _AAL34_PARAMETERS { USHORT ForwardMaxCPCSSDUSize; USHORT BackwardMaxCPCSSDUSize; USHORT LowestMID; USHORT HighestMID; UCHAR SSCSType; } AAL34_PARAMETERS, *PAAL34_PARAMETERS; typedef struct _AAL5_PARAMETERS { ULONG ForwardMaxCPCSSDUSize; ULONG BackwardMaxCPCSSDUSize; UCHAR Mode; UCHAR SSCSType; } AAL5_PARAMETERS, *PAAL5_PARAMETERS; typedef struct _AALUSER_PARAMETERS { ULONG UserDefined; } AALUSER_PARAMETERS, *PAALUSER_PARAMETERS; typedef struct _AAL_PARAMETERS_IE { ATM_AAL_TYPE AALType; union { AAL1_PARAMETERS AAL1Parameters; AAL34_PARAMETERS AAL34Parameters; AAL5_PARAMETERS AAL5Parameters; AALUSER_PARAMETERS AALUserParameters; } AALSpecificParameters; } AAL_PARAMETERS_IE, *PAAL_PARAMETERS_IE; // // ATM Traffic Descriptor // typedef struct _ATM_TRAFFIC_DESCRIPTOR // For one direction { ULONG PeakCellRateCLP0; ULONG PeakCellRateCLP01; ULONG SustainableCellRateCLP0; ULONG SustainableCellRateCLP01; ULONG MaximumBurstSizeCLP0; ULONG MaximumBurstSizeCLP01; BOOLEAN Tagging; } ATM_TRAFFIC_DESCRIPTOR, *PATM_TRAFFIC_DESCRIPTOR; typedef struct _ATM_TRAFFIC_DESCRIPTOR_IE { ATM_TRAFFIC_DESCRIPTOR ForwardTD; ATM_TRAFFIC_DESCRIPTOR BackwardTD; BOOLEAN BestEffort; } ATM_TRAFFIC_DESCRIPTOR_IE, *PATM_TRAFFIC_DESCRIPTOR_IE; // // values used for the BearerClass field in the Broadband Bearer Capability IE // #define BCOB_A 0x00 // Bearer class A #define BCOB_C 0x01 // Bearer class C #define BCOB_X 0x02 // Bearer class X // // values used for the TrafficType field in the Broadband Bearer Capability IE // #define TT_NOIND 0x00 // No indication of traffic type #define TT_CBR 0x04 // Constant bit rate #define TT_VBR 0x08 // Variable bit rate // // values used for the TimingRequirements field in the Broadband Bearer Capability IE // #define TR_NOIND 0x00 // No timing requirement indication #define TR_END_TO_END 0x01 // End-to-end timing required #define TR_NO_END_TO_END 0x02 // End-to-end timing not required // // values used for the ClippingSusceptability field in the Broadband Bearer Capability IE // #define CLIP_NOT 0x00 // Not susceptible to clipping #define CLIP_SUS 0x20 // Susceptible to clipping // // values used for the UserPlaneConnectionConfig field in // the Broadband Bearer Capability IE // #define UP_P2P 0x00 // Point-to-point connection #define UP_P2MP 0x01 // Point-to-multipoint connection // // Broadband Bearer Capability // typedef struct _ATM_BROADBAND_BEARER_CAPABILITY_IE { UCHAR BearerClass; UCHAR TrafficType; UCHAR TimingRequirements; UCHAR ClippingSusceptability; UCHAR UserPlaneConnectionConfig; } ATM_BROADBAND_BEARER_CAPABILITY_IE, *PATM_BROADBAND_BEARER_CAPABILITY_IE; // // values used for the HighLayerInfoType field in ATM_BHLI // #define BHLI_ISO 0x00 // ISO #define BHLI_UserSpecific 0x01 // User Specific #define BHLI_HighLayerProfile 0x02 // High layer profile (only in UNI3.0) #define BHLI_VendorSpecificAppId 0x03 // Vendor-Specific Application ID // // Broadband High layer Information // typedef struct _ATM_BHLI_IE { ULONG HighLayerInfoType; // High Layer Information Type ULONG HighLayerInfoLength; // number of bytes in HighLayerInfo UCHAR HighLayerInfo[8]; // The value dependent on the // HighLayerInfoType field } ATM_BHLI_IE, *PATM_BHLI_IE; // // values used for Layer2Protocol in B-LLI // #define BLLI_L2_ISO_1745 0x01 // Basic mode ISO 1745 #define BLLI_L2_Q921 0x02 // CCITT Rec. Q.921 #define BLLI_L2_X25L 0x06 // CCITT Rec. X.25, link layer #define BLLI_L2_X25M 0x07 // CCITT Rec. X.25, multilink #define BLLI_L2_ELAPB 0x08 // Extended LAPB; for half duplex operation #define BLLI_L2_HDLC_ARM 0x09 // HDLC ARM (ISO 4335) #define BLLI_L2_HDLC_NRM 0x0A // HDLC NRM (ISO 4335) #define BLLI_L2_HDLC_ABM 0x0B // HDLC ABM (ISO 4335) #define BLLI_L2_LLC 0x0C // LAN logical link control (ISO 8802/2) #define BLLI_L2_X75 0x0D // CCITT Rec. X.75, single link procedure #define BLLI_L2_Q922 0x0E // CCITT Rec. Q.922 #define BLLI_L2_USER_SPECIFIED 0x10 // User Specified #define BLLI_L2_ISO_7776 0x11 // ISO 7776 DTE-DTE operation // // values used for Layer3Protocol in B-LLI // #define BLLI_L3_X25 0x06 // CCITT Rec. X.25, packet layer #define BLLI_L3_ISO_8208 0x07 // ISO/IEC 8208 (X.25 packet layer for DTE #define BLLI_L3_X223 0x08 // X.223/ISO 8878 #define BLLI_L3_SIO_8473 0x09 // ISO/IEC 8473 (OSI connectionless) #define BLLI_L3_T70 0x0A // CCITT Rec. T.70 min. network layer #define BLLI_L3_ISO_TR9577 0x0B // ISO/IEC TR 9577 Network Layer Protocol ID #define BLLI_L3_USER_SPECIFIED 0x10 // User Specified // // values used for Layer3IPI in struct B-LLI // #define BLLI_L3_IPI_SNAP 0x80 // IEEE 802.1 SNAP identifier #define BLLI_L3_IPI_IP 0xCC // Internet Protocol (IP) identifier // // Broadband Lower Layer Information // typedef struct _ATM_BLLI_IE { ULONG Layer2Protocol; UCHAR Layer2Mode; UCHAR Layer2WindowSize; ULONG Layer2UserSpecifiedProtocol; ULONG Layer3Protocol; UCHAR Layer3Mode; UCHAR Layer3DefaultPacketSize; UCHAR Layer3PacketWindowSize; ULONG Layer3UserSpecifiedProtocol; ULONG Layer3IPI; UCHAR SnapId[5]; } ATM_BLLI_IE, *PATM_BLLI_IE; // // Called Party Number // // If present, this IE overrides the Called Address specified in // the main parameter block. // typedef ATM_ADDRESS ATM_CALLED_PARTY_NUMBER_IE; // // Called Party Subaddress // typedef ATM_ADDRESS ATM_CALLED_PARTY_SUBADDRESS_IE; // // Calling Party Number // typedef struct _ATM_CALLING_PARTY_NUMBER_IE { ATM_ADDRESS Number; UCHAR PresentationIndication; UCHAR ScreeningIndicator; } ATM_CALLING_PARTY_NUMBER_IE, *PATM_CALLING_PARTY_NUMBER_IE; // // Calling Party Subaddress // typedef ATM_ADDRESS ATM_CALLING_PARTY_SUBADDRESS_IE; // // Values used for the QOSClassForward and QOSClassBackward // fields in ATM_QOS_CLASS_IE // #define QOS_CLASS0 0x00 #define QOS_CLASS1 0x01 #define QOS_CLASS2 0x02 #define QOS_CLASS3 0x03 #define QOS_CLASS4 0x04 // // QOS Class // typedef struct _ATM_QOS_CLASS_IE { UCHAR QOSClassForward; UCHAR QOSClassBackward; } ATM_QOS_CLASS_IE, *PATM_QOS_CLASS_IE; // // Broadband Sending Complete // typedef struct _ATM_BROADBAND_SENDING_COMPLETE_IE { UCHAR SendingComplete; } ATM_BROADBAND_SENDING_COMPLETE_IE, *PATM_BROADBAND_SENDING_COMPLETE_IE; // // Values used for the TypeOfNetworkId field in ATM_TRANSIT_NETWORK_SELECTION_IE // #define TNS_TYPE_NATIONAL 0x40 // // Values used for the NetworkIdPlan field in ATM_TRANSIT_NETWORK_SELECTION_IE // #define TNS_PLAN_CARRIER_ID_CODE 0x01 // // Transit Network Selection // typedef struct _ATM_TRANSIT_NETWORK_SELECTION_IE { UCHAR TypeOfNetworkId; UCHAR NetworkIdPlan; UCHAR NetworkIdLength; UCHAR NetworkId[1]; } ATM_TRANSIT_NETWORK_SELECTION_IE, *PATM_TRANSIT_NETWORK_SELECTION_IE; // // Values used for the Location field in struct ATM_CAUSE_IE // #define ATM_CAUSE_LOC_USER 0x00 #define ATM_CAUSE_LOC_PRIVATE_LOCAL 0x01 #define ATM_CAUSE_LOC_PUBLIC_LOCAL 0x02 #define ATM_CAUSE_LOC_TRANSIT_NETWORK 0x03 #define ATM_CAUSE_LOC_PUBLIC_REMOTE 0x04 #define ATM_CAUSE_LOC_PRIVATE_REMOTE 0x05 #define ATM_CAUSE_LOC_INTERNATIONAL_NETWORK 0x07 #define ATM_CAUSE_LOC_BEYOND_INTERWORKING 0x0A // // Values used for the Cause field in struct ATM_CAUSE_IE // #define ATM_CAUSE_UNALLOCATED_NUMBER 0x01 #define ATM_CAUSE_NO_ROUTE_TO_TRANSIT_NETWORK 0x02 #define ATM_CAUSE_NO_ROUTE_TO_DESTINATION 0x03 #define ATM_CAUSE_VPI_VCI_UNACCEPTABLE 0x0A #define ATM_CAUSE_NORMAL_CALL_CLEARING 0x10 #define ATM_CAUSE_USER_BUSY 0x11 #define ATM_CAUSE_NO_USER_RESPONDING 0x12 #define ATM_CAUSE_CALL_REJECTED 0x15 #define ATM_CAUSE_NUMBER_CHANGED 0x16 #define ATM_CAUSE_USER_REJECTS_CLIR 0x17 #define ATM_CAUSE_DESTINATION_OUT_OF_ORDER 0x1B #define ATM_CAUSE_INVALID_NUMBER_FORMAT 0x1C #define ATM_CAUSE_STATUS_ENQUIRY_RESPONSE 0x1E #define ATM_CAUSE_NORMAL_UNSPECIFIED 0x1F #define ATM_CAUSE_VPI_VCI_UNAVAILABLE 0x23 #define ATM_CAUSE_NETWORK_OUT_OF_ORDER 0x26 #define ATM_CAUSE_TEMPORARY_FAILURE 0x29 #define ATM_CAUSE_ACCESS_INFORMAION_DISCARDED 0x2B #define ATM_CAUSE_NO_VPI_VCI_AVAILABLE 0x2D #define ATM_CAUSE_RESOURCE_UNAVAILABLE 0x2F #define ATM_CAUSE_QOS_UNAVAILABLE 0x31 #define ATM_CAUSE_USER_CELL_RATE_UNAVAILABLE 0x33 #define ATM_CAUSE_BEARER_CAPABILITY_UNAUTHORIZED 0x39 #define ATM_CAUSE_BEARER_CAPABILITY_UNAVAILABLE 0x3A #define ATM_CAUSE_OPTION_UNAVAILABLE 0x3F #define ATM_CAUSE_BEARER_CAPABILITY_UNIMPLEMENTED 0x41 #define ATM_CAUSE_UNSUPPORTED_TRAFFIC_PARAMETERS 0x49 #define ATM_CAUSE_INVALID_CALL_REFERENCE 0x51 #define ATM_CAUSE_CHANNEL_NONEXISTENT 0x52 #define ATM_CAUSE_INCOMPATIBLE_DESTINATION 0x58 #define ATM_CAUSE_INVALID_ENDPOINT_REFERENCE 0x59 #define ATM_CAUSE_INVALID_TRANSIT_NETWORK_SELECTION 0x5B #define ATM_CAUSE_TOO_MANY_PENDING_ADD_PARTY 0x5C #define ATM_CAUSE_AAL_PARAMETERS_UNSUPPORTED 0x5D #define ATM_CAUSE_MANDATORY_IE_MISSING 0x60 #define ATM_CAUSE_UNIMPLEMENTED_MESSAGE_TYPE 0x61 #define ATM_CAUSE_UNIMPLEMENTED_IE 0x63 #define ATM_CAUSE_INVALID_IE_CONTENTS 0x64 #define ATM_CAUSE_INVALID_STATE_FOR_MESSAGE 0x65 #define ATM_CAUSE_RECOVERY_ON_TIMEOUT 0x66 #define ATM_CAUSE_INCORRECT_MESSAGE_LENGTH 0x68 #define ATM_CAUSE_PROTOCOL_ERROR 0x6F // // Values used for the Condition portion of the Diagnostics field // in struct ATM_CAUSE_IE, for certain Cause values // #define ATM_CAUSE_COND_UNKNOWN 0x00 #define ATM_CAUSE_COND_PERMANENT 0x01 #define ATM_CAUSE_COND_TRANSIENT 0x02 // // Values used for the Rejection Reason portion of the Diagnostics field // in struct ATM_CAUSE_IE, for certain Cause values // #define ATM_CAUSE_REASON_USER 0x00 #define ATM_CAUSE_REASON_IE_MISSING 0x04 #define ATM_CAUSE_REASON_IE_INSUFFICIENT 0x08 // // Values used for the P-U flag of the Diagnostics field // in struct ATM_CAUSE_IE, for certain Cause values // #define ATM_CAUSE_PU_PROVIDER 0x00 #define ATM_CAUSE_PU_USER 0x08 // // Values used for the N-A flag of the Diagnostics field // in struct ATM_CAUSE_IE, for certain Cause values // #define ATM_CAUSE_NA_NORMAL 0x00 #define ATM_CAUSE_NA_ABNORMAL 0x04 // // Cause // typedef struct _ATM_CAUSE_IE { UCHAR Location; UCHAR Cause; UCHAR DiagnosticsLength; UCHAR Diagnostics[4]; } ATM_CAUSE_IE, *PATM_CAUSE_IE; // // Leaf Initiated Join (LIJ) Identifier // typedef struct _ATM_LIJ_CALLID_IE { ULONG Identifier; } ATM_LIJ_CALLID_IE, *PATM_LIJ_CALLID_IE; // // Raw Information Element - the user can fill in whatever he wants // typedef struct _ATM_RAW_IE { ULONG RawIELength; ULONG RawIEType; UCHAR RawIEValue[1]; } ATM_RAW_IE, *PATM_RAW_IE; // // This is the value of the ParamType field in the CO_SPECIFIC_PARAMETERS structure // when the Parameters[] field contains ATM media specific values in the structure // ATM_MEDIA_PARAMETERS. // #define ATM_MEDIA_SPECIFIC 0x00000001 // // The Q2931 Call Manager Specific parameters that goes into the // CallMgrParameters->CallMgrSpecific.Parameters // typedef struct _Q2931_CALLMGR_PARAMETERS { ATM_ADDRESS CalledParty; ATM_ADDRESS CallingParty; ULONG InfoElementCount; UCHAR InfoElements[1]; // one or more info elements } Q2931_CALLMGR_PARAMETERS, *PQ2931_CALLMGR_PARAMETERS; // // This is the specific portion of either the Media parameters or the CallMgr // Parameters. The following two defines are used in the ParamType field // depending on the signaling type. // #define CALLMGR_SPECIFIC_Q2931 0x00000001 typedef struct _ATM_VPIVCI { ULONG Vpi; ULONG Vci; } ATM_VPIVCI, *PATM_VPIVCI; // // ATM Service Category // #define ATM_SERVICE_CATEGORY_CBR 1 // Constant Bit Rate #define ATM_SERVICE_CATEGORY_VBR 2 // Variable Bit Rate #define ATM_SERVICE_CATEGORY_UBR 4 // Unspecified Bit Rate #define ATM_SERVICE_CATEGORY_ABR 8 // Available Bit Rate typedef ULONG ATM_SERVICE_CATEGORY, *PATM_SERVICE_CATEGORY; // // ATM flow parameters for use in specifying Media parameters // typedef struct _ATM_FLOW_PARAMETERS { ATM_SERVICE_CATEGORY ServiceCategory; ULONG AverageCellRate; // in cells/sec ULONG PeakCellRate; // in cells/sec ULONG MinimumCellRate; // in cells/sec (ABR MCR) ULONG InitialCellRate; // in cells/sec (ABR ICR) ULONG BurstLengthCells; // in cells ULONG MaxSduSize; // MTU in bytes ULONG TransientBufferExposure; // in cells (ABR TBE) ULONG CumulativeRMFixedRTT; // in microseconds (ABR FRTT) UCHAR RateIncreaseFactor; // UNI 4.0 coding (ABR RIF) UCHAR RateDecreaseFactor; // UNI 4.0 coding (ABR RDF) USHORT ACRDecreaseTimeFactor; // UNI 4.0 coding (ABR ADTF) UCHAR MaximumCellsPerForwardRMCell; // UNI 4.0 coding (ABR Nrm) UCHAR MaximumForwardRMCellInterval; // UNI 4.0 coding (ABR Trm) UCHAR CutoffDecreaseFactor; // UNI 4.0 coding (ABR CDF) UCHAR Reserved1; // padding ULONG MissingRMCellCount; // (ABR CRM) ULONG Reserved2; ULONG Reserved3; } ATM_FLOW_PARAMETERS, *PATM_FLOW_PARAMETERS; // // ATM Specific Media parameters - this is the Media specific structure for ATM // that goes into MediaParameters->MediaSpecific.Parameters. // typedef struct _ATM_MEDIA_PARAMETERS { ATM_VPIVCI ConnectionId; ATM_AAL_TYPE AALType; ULONG CellDelayVariationCLP0; ULONG CellDelayVariationCLP1; ULONG CellLossRatioCLP0; ULONG CellLossRatioCLP1; ULONG CellTransferDelayCLP0; ULONG CellTransferDelayCLP1; ULONG DefaultCLP; ATM_FLOW_PARAMETERS Transmit; ATM_FLOW_PARAMETERS Receive; } ATM_MEDIA_PARAMETERS, *PATM_MEDIA_PARAMETERS; // Bit 0 in Reserved1 in ATM_FLOW_PARAMETERS is reserved. #define ATM_FLOW_PARAMS_RSVD1_MPP 0x01 #ifndef SAP_FIELD_ABSENT #define SAP_FIELD_ABSENT ((ULONG)0xfffffffe) #endif #ifndef SAP_FIELD_ANY #define SAP_FIELD_ANY ((ULONG)0xffffffff) #endif #define SAP_FIELD_ANY_AESA_SEL ((ULONG)0xfffffffa) // SEL is wild-carded #define SAP_FIELD_ANY_AESA_REST ((ULONG)0xfffffffb) // All of the address // except SEL, is wild-carded // // The ATM Specific SAP definition // typedef struct _ATM_SAP { ATM_BLLI_IE Blli; ATM_BHLI_IE Bhli; ULONG NumberOfAddresses; UCHAR Addresses[1]; // each of type ATM_ADDRESS } ATM_SAP, *PATM_SAP; // // The ATM Specific SAP definition when adding PVCs // typedef struct _ATM_PVC_SAP { ATM_BLLI_IE Blli; ATM_BHLI_IE Bhli; } ATM_PVC_SAP, *PATM_PVC_SAP; // // The structure passed in the Parameters field of the CO_SPECIFIC_PARAMETERS // structure passed in an ADD PVC request for Q.2931 // typedef struct _Q2931_ADD_PVC { ATM_ADDRESS CalledParty; ATM_ADDRESS CallingParty; ATM_VPIVCI ConnectionId; ATM_AAL_TYPE AALType; ATM_FLOW_PARAMETERS ForwardFP; ATM_FLOW_PARAMETERS BackwardFP; ULONG Flags; ATM_PVC_SAP LocalSap; ATM_PVC_SAP DestinationSap; BOOLEAN LIJIdPresent; ATM_LIJ_CALLID_IE LIJId; } Q2931_ADD_PVC, *PQ2931_ADD_PVC; // // These flags are defined to be used with Q2931_ADD_PVC above // // this VC should be used by the CallMgr as the signaling VC now #define CO_FLAG_SIGNALING_VC 0x00000001 // // Use this flag for a PVC that cannot be used for a MakeCall - incoming call only // the call mgr can then be optimized not to search these PVCs during make call // processing. #define CO_FLAG_NO_DEST_SAP 0x00000002 // // Use this flag for a PVC that cannot be used to indicate an incoming call. // #define CO_FLAG_NO_LOCAL_SAP 0x00000004 // // the structure passed in the Parameters field of the CO_SPECIFIC_PARAMETERS // structure passed in an NDIS_CO_PVC request for Q2931 // typedef struct _Q2931_DELETE_PVC { ATM_VPIVCI ConnectionId; } Q2931_DELETE_PVC, *PQ2931_DELETE_PVC; typedef struct _CO_GET_CALL_INFORMATION { ULONG CallInfoType; ULONG CallInfoLength; PVOID CallInfoBuffer; } CO_GET_CALL_INFORMATION, *PCO_GET_CALL_INFORMATION; // // the structure for returning the supported VC rates from the miniport, // returned in response to OID_ATM_SUPPORTED_VC_RATES // typedef struct _ATM_VC_RATES_SUPPORTED { ULONG MinCellRate; ULONG MaxCellRate; } ATM_VC_RATES_SUPPORTED, *PATM_VC_RATES_SUPPORTED; // // NDIS_PACKET out of band information for ATM. // typedef struct _ATM_AAL_OOB_INFO { ATM_AAL_TYPE AalType; union { struct _ATM_AAL5_INFO { BOOLEAN CellLossPriority; UCHAR UserToUserIndication; UCHAR CommonPartIndicator; } ATM_AAL5_INFO; struct _ATM_AAL0_INFO { BOOLEAN CellLossPriority; UCHAR PayLoadTypeIdentifier; } ATM_AAL0_INFO; }; } ATM_AAL_OOB_INFO, *PATM_AAL_OOB_INFO; // // Physical Line Speeds in bits/sec. // #define ATM_PHYS_RATE_SONET_STS3C 155520000 #define ATM_PHYS_RATE_IBM_25 25600000 // // ATM cell layer transfer capacities in bits/sec. This is the throughput // available for ATM cells, after allowing for physical framing overhead. // #define ATM_CELL_TRANSFER_CAPACITY_SONET_STS3C 149760000 #define ATM_CELL_TRANSFER_CAPACITY_IBM_25 25125926 // // User data rate in units of 100 bits/sec. This is returned in response to // the OID_GEN_CO_LINK_SPEED query. This is the effective rate of // transfer of data available to the ATM layer user, after allowing for // the ATM cell header. // #define ATM_USER_DATA_RATE_SONET_155 1356317 #define ATM_USER_DATA_RATE_IBM_25 227556 // // The ATM Service Registry MIB Table is used to locate ATM network // services. OID_ATM_GET_SERVICE_ADDRESS is used by clients to access // this table. // typedef ULONG ATM_SERVICE_REGISTRY_TYPE; #define ATM_SERVICE_REGISTRY_LECS 1 // LAN Emulation Configuration Server #define ATM_SERVICE_REGISTRY_ANS 2 // ATM Name Server // // Structure passed to OID_ATM_GET_SERVICE_ADDRESS. // typedef struct _ATM_SERVICE_ADDRESS_LIST { ATM_SERVICE_REGISTRY_TYPE ServiceRegistryType; ULONG NumberOfAddressesAvailable; ULONG NumberOfAddressesReturned; ATM_ADDRESS Address[1]; } ATM_SERVICE_ADDRESS_LIST, *PATM_SERVICE_ADDRESS_LIST; #endif // _ATM_H_